Skip to content

Archive for

29
Jul

Shoulder to Shoulder

finishedclose

Stand Firm, Lads! Let them feel the bite of our spears!

With another game convention coming up and interest in Mantic Games’ Kings of War (http://www.manticgames.com/games/kings-of-war.html) growing in our little gaming group we decided to all come together for a big battle where each commander provides 500 points. With that we can either play fast one on ones or mix them up for a massed battle of alliances.  Being nostalgic for the BEST campaign our group has ever played let alone completed (thanks largely to Aron and Nils), set underground in the world of Warhammer, we agreed to try and theme our armies to what we ran those many years ago.  An excellent reason to break out the Spring of Darga One Eye, incidentally, as I will be running Dwarfs!   Time to pull out the boxes of “unpainted troops” and start assembling new units and I do mean assemble because without the game mechanic of removing figures as casualties I can make whole units on a single base.  Almost like little dioramas.

Looking over the finished figures before the gluing begins.

Looking over the finished figures before the gluing begins.

Now understand, I have loved most things dwarfish since seeing Disney’s Snow White at age four. These deeply honorable, hard working, hard partying, master craftsmen just lit  something that Bilbo’s companions fanned to an inferno by the time I was in fifth grade.  Once I was introduced to RPG figures (I’m talking Ral Partha, Grenadier and Heritage here for my Original Gamer homies- pouring some enamel paint on the ground in tribute) and preslotta Citadel (thanks, Necron_99, for getting me addicted to war-games) I was hooked on the bearded short guys.  So having made that clear it can be assumed I have amassed a decent and varied collection of painted troops in the intervening decades and can assemble a force for most games out of what I own regardless of system.  I even have a navy and air force. What I didn’t have were any of Mantic Games’ Dwarf Bulwarkers and if I was going to run a KoW Dwarf force then that wasn’t going to stand for long, besides, they were perfect to be led by the Mantic Warsmith and Army Standard Bearer figures I had long wanted to get out of my unpainted collection and into a unit.  So how to prep, paint, and build these figures into a solid block without going crazy or gluing my fingers together (again)?

onthetable3

Spear armed dwarfs cycling through the table glacier.

onthetable2

Base coats done ready for stains, highlights, and details.

onthetable1

Yet more spear on the table. Felt like more than the twenty I had assembled for a while there.

As much as I like the bits and pieces that Mantic includes on the sprue to make the commanders I have had the metal Warsmith and Army Standard Bearer figures from their boxed set for quite some time.  They are among my favorite of Mantic’s dwarf models, right behind the hero on a giant badger but that is for another blog and I digress.  I checked to make sure they would fit both the shield wall and character of the unit.

testfit

Testassembly

Thane Stoneoath

Thane Stoneoath

leaderback

Maybe the detail won’t show once the unit is assembled but I’ll know it’s there.

Stfront

The standard is assembled from various trinkets in my “Unpainted Dwarfs” box and represents the unit’s history.

Unit Standard

Unit Standard from behind.

 The first issue I faced was the fact that this is one of Mantic’s hybrid kits, plastic dwarf sprues with pewter spear wielding arms included.  While this leaves one with lots of extra pieces to drop in the “Bits Box” it does mean only clean joins and super glue (cyanoacrylate) will bond the pieces.  I found the spears to be a nice length and thickness which was fortunate as it was also a little brittle.  I found I had to drill and pin about half of the “two handed” spears though this actually made it easier to adjust the angle before attaching to the bodies.  Fortuitous headache.  The second issue I saw right away was painting and basing tightly ranked soldiers.  I decided to use one of the old unit bases I had laying around and attach individual bases to that thinking it would help hide the little discs the figures are standing on as well as help rank them up. Next time I’ll just use glue them to flat plastic and save some frustration as flock hides a lot and trying to fit the finished figures together and into the holes was just unnecessarily fiddly.

firstrowbased

Oh, I’m sure there is plenty of room on there for all those little soldiers.

After I had painted the entire unit I had to reassemble it to see which dwarf fit where.  Typical of me, I had complicated the issue by adding in the bulkier metal commanders and my Gamer OCD required that the two trooper on the front corners also have spears rather than hand weapons.  I realized part way through assembly that the shields were probably designed to be held rather than embedded in the ground as I had done but I feel they look heavier and more imposing this way. I can imagine thick stakes holding them in place.

Tower shields glued in place and flocked

Tower shields glued in place and flocked

Test fitting the unit. Looks like a couple are drunk.

Test fitting the unit. Looks like a couple are drunk.

Going to look good from the side if I can get them to all fit and stand up straight.

Going to look good from the side if I can get them to all fit and stand up straight.

I sprayed all the finished figures and shields with matte sealant to protect their paint jobs from all my handling and to make sure all surfaces were covered before the soldiers were glued shoulder to shoulder. Some folks like simple sand texture on the bases while others will create entire ecosystems at the feet of their toy soldiers.  For my war-game dwarfs (and undead) I like to use a mix of several Woodland Scenics’ brown flocks, mixed ballast as well as charcoal from a water filter. I decided to flock all around the finished shields as well as each figure’s little disc to begin with.  Then I would glue down the front row of troops, flock all around it before gluing down the next row. When this was finished they were ready for another coat of sealant. I will probably go back later and glue on tufts of grass.

Time for flocking

Time for flocking

Halfway through gluing and the paint is down for the next round of flock.

Halfway through gluing soldiers and the paint is down for the next row.

So here they are, Thane Stoneoath’s Bulwarkers.  I really like how solid the unit looks and am looking forward to moving it around the table as well as finding out how well they do in Kings of War.  I think I may need another unit eventually just because they look so cool but until then there are a couple of artillery pieces I’ve been aching to get done and some nice wooden circles the perfect size turn them into little dioramas.

Finished unit as viewed from the news gyrocopter

Finished unit as viewed from the news gyrocopter

Looks like a formidable force.

Looks like a formidable force.

 

2
Jul

Ruh Roh, Rombies! Part One

 

SDGang1

I have been in love with Hasslefree Miniatures’ (http://www.hfminis.co.uk/) Scooby Doo Gang as Zombie Fighters figures since the first time I saw them. I knew if I ordered them I would find a reason to use them eventually but it wasn’t until KublaCon 2012 when I acquired a HorrorClix Undead Cosmonaut that I knew I had to make a diorama.  Okay, a little clarification on my use of “acquired”. Necron99 actually picked it up as part of his Friday night flea market haul.  Immediately upon seeing it, I grabbed it and said he was needed to face my Scooby Gang. Being a man who appreciates aesthetics as much as he does classic cartoons he graciously agreed to let me have the radiated figure. Then it was a a simple matter of ordering a Zombie Dog Walker and Deep Sea Diver (would need some conversion) from Reaper Miniatures and my cast was complete.Spooky Cosmonaut

Cut off the right arm and replaced it with a Mantic Skeletal Arm

Cut off the right arm and replaced it with a Mantic Skeletal Arm

Rotting Walkies

Now, if they were going to be fighting zombies, real zombies as opposed to guys in rubber masks, then their Mystery Machine would really need an upgrade.  I have found that Daemonscape (http://www.daemonscape.com/index.html) is a good place to start for science fiction vehicles and after some looking around settled on the armed and armored, four track Snow Cat.

Gang included for scale. Turret only on with Blu-Tac. More on that later.

Gang included for scale. Turret only on with Blu-Tac. More on that later.

GangwMM

Now that I had the pieces assembled it was time to plan out the display board and start painting but that can wait for another post.